Among fasteners, hex bolts are the most common, and hex bolts are hex bolts and hex bolts.So, what is the difference between hex socket bolt and hex head bolt?Let’s use the editor to look at the difference between hex bolts and hex bolts.I hope it can help you.

According to the shape of the bolt head, hex head bolts are divided into hex head bolts and hex head bolts, which have nothing to do with the material of the bolt and the bearing capacity of the bolt.

The outer end of the bolt head of the hex socket bolt is round, and the middle is concave hexagonal.Hexagon bolts are the hexagonal bolts of the bolt head, which are common in our common place.

Key differences:

Hex socket bolts are often used in machinery, mainly for easy tightening, disassembly and non-slip.

Hexagon socket wrenches usually have a 90° bend.The curved ends are long and short.When using a short side bolt, the long side of the hand can save a lot of force and tighten the bolt better.The long ends are divided into round heads (such as the hexagonal cylinder of a sphere) and flat heads.The round head can be easily dismounted and installed at an incline, and some parts of the lower wrench are installed inconveniently.

The manufacturing cost of hex bolt is much lower than that of hex bolt.It has a screw head on the top flap (the wrench is thinner than the inside hexagon), and there are places where the inside hexagon can’t be replaced.In addition, the cost of machines with low cost, low dynamic strength and low precision requirements is much lower than that of outer hexagons.

The above is about the difference between hex socket bolt and hex socket bolt.