Stainless Steel Nuts
M10 x 1.25 Countersunk Bolt
19/04/2021
M8 Nuts
19/04/2021
stainless steel nuts
The stainless steel all-metal lock nut is different from the nylon lock nut. The lock piece of the stainless steel all-metal lock nut is also installed with a metal piece. The production process of this kind of all-metal lock nut is relatively more complicated. First, the nut needs to be punched into a blank, and the end of the metal wrapped on it needs to be turned into a hollow cylinder similar structure, and then the stamped metal Place the sheet on this end, and then use a liquid device similar to a punch to squeeze the cylinder downward, wrap the metal sheet and lock it inside. The diameter of this end of the metal piece is slightly larger than the diameter of the thread. When the nut is tightened, the piece of metal will be clamped tightly along the thread very forcefully. Basically, it will not loosen without tools. . When the cost budget permits, the use of all-metal lock nuts is the best way to solve thread looseness.stainless steel nuts Images
The stainless steel nylon lock nut is equipped with a nylon washer on one side of the nut. The friction between the nylon ring and the bolt is used to prevent loosening and locking during installation. There are two kinds of materials: SUS304 and SUS316. The production of stainless steel nylon anti-loosening lock nuts is to first cold forge the metal part, leaving a washer inlet into which the nylon is inserted, and then stamp the nylon washer from the top. Standard specifications of stainless steel nylon lock nuts are sold from stock. The production method of nylon lock nuts is similar to that of all metal, but the effect is very different. The nylon lock nut uses the non-lubrication of the plastic to strengthen the friction with the thread. When the nylon ring heats up, it will expand and then strengthen the friction locking performance. The all-metal lock nut is directly clamped between the threads with a metal sheet. To achieve the purpose of preventing loosening. The following is a standard nylon lock nut, technical specifications refer to DIN985.
Stainless steel caps are also called cap nuts. They are divided into one-piece and combined caps. They are mostly used in the housing of equipment. Such as lamps and lanterns. The stainless steel cap nuts of Fanao Company play a role of rust prevention and beauty after installation. The cap is formed by a cold forging with equipment and a mold, and then after automatic tapping, it can be cleaned and polished before use. The cap is more used on lamps and home furnishings. If you are interested, you can look at the furniture or lamps around you, and you should be able to find the same products. The standard of the cap is the technical condition of DIN923. Look at the picture below, you will find that one end of it looks like an ingot. All people are in it ingot nuts, but the name is not very professional.
The stainless steel K cap is equipped with a movable washer with teeth on one side of a standard hexagonal stainless steel nut. The K cap will have an extra punching process in the production. It plays a role of anti-loosening and locking during installation and use. The installation of this ring of toothed washer of the K cap also requires secondary processing to complete, and it cannot be cold forged into a finished product at one time. Stainless steel K caps are available in metric and American standards. Common specifications are stocked online. In fact, the scope of K hat is not too much, so I don’t know how to describe it in detail. Let’s look at the picture:
Stainless steel wing nut means that there are two iron pieces at the oblique upper corner of both ends of the stainless steel nut that are easy to handle by hand. Generally, you do not need to use tools during installation and can be directly rotated by hand. The advantage of stainless steel wing nut is that it is easy to install. Easy to disassemble. This stainless steel wing nut is actually quite interesting. It has a limited range of use and is basically similar to a cap. It is mainly used on some unpopular small furniture or toys. The amount is not large, but the production is very troublesome. It can be cold forged, poured, and even welded. Look at the following picture to understand:
Stainless steel square nuts are mostly used in a groove or in an environment with a four-corner hole. Generally, another wrench is not used to fix the square nut when installing the stainless steel square nut. Stainless steel lock nut manufacturer-Wuxi Fanao specializes in producing all kinds of stainless steel lock nuts. The production range includes: stainless steel hexagon nuts, stainless steel lock nuts, stainless steel locknuts, stainless steel all-metal lock nuts, stainless steel caps, flange nuts, hexagonal welding nuts, wing nuts and other products. In addition to the spot sales of metric nuts, some fine-tooth hexagon nuts and American standard nuts are stocked online in large quantities. The company has been engaged in the fastener industry for nearly ten years. From a pure sales company to the establishment of our own production base in 2006, we have a clear understanding from our customers' years of supporting experience: although screws are small, safety matters !
Stainless steel caps are also called cap nuts. They are divided into one-piece and combined caps. They are mostly used in the housing of equipment. Such as lamps and lanterns. The stainless steel cap nuts of Fanao Company play a role of rust prevention and beauty after installation. The cap is formed by a cold forging with equipment and a mold, and then after automatic tapping, it can be cleaned and polished before use. The cap is more used on lamps and home furnishings. If you are interested, you can look at the furniture or lamps around you, and you should be able to find the same products. The standard of the cap is the technical condition of DIN923. Look at the picture below, you will find that one end of it looks like an ingot. All people are in it ingot nuts, but the name is not very professional.
The stainless steel K cap is equipped with a movable washer with teeth on one side of a standard hexagonal stainless steel nut. The K cap will have an extra punching process in the production. It plays a role of anti-loosening and locking during installation and use. The installation of this ring of toothed washer of the K cap also requires secondary processing to complete, and it cannot be cold forged into a finished product at one time. Stainless steel K caps are available in metric and American standards. Common specifications are stocked online. In fact, the scope of K hat is not too much, so I don’t know how to describe it in detail. Let’s look at the picture:
Stainless steel wing nut means that there are two iron pieces at the oblique upper corner of both ends of the stainless steel nut that are easy to handle by hand. Generally, you do not need to use tools during installation and can be directly rotated by hand. The advantage of stainless steel wing nut is that it is easy to install. Easy to disassemble. This stainless steel wing nut is actually quite interesting. It has a limited range of use and is basically similar to a cap. It is mainly used on some unpopular small furniture or toys. The amount is not large, but the production is very troublesome. It can be cold forged, poured, and even welded. Look at the following picture to understand:
Stainless steel square nuts are mostly used in a groove or in an environment with a four-corner hole. Generally, another wrench is not used to fix the square nut when installing the stainless steel square nut. Stainless steel lock nut manufacturer-Wuxi Fanao specializes in producing all kinds of stainless steel lock nuts. The production range includes: stainless steel hexagon nuts, stainless steel lock nuts, stainless steel locknuts, stainless steel all-metal lock nuts, stainless steel caps, flange nuts, hexagonal welding nuts, wing nuts and other products. In addition to the spot sales of metric nuts, some fine-tooth hexagon nuts and American standard nuts are stocked online in large quantities. The company has been engaged in the fastener industry for nearly ten years. From a pure sales company to the establishment of our own production base in 2006, we have a clear understanding from our customers' years of supporting experience: although screws are small, safety matters !
