Nylon lock Nut

Nylon lock Nut Description

Nylon lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft Washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose. Bolt thread on the nuts embedded in the nylon extrusion, making the nylon deformation, after installation, the nylon and thread completely squeeze contact, the extruded nylon to the bolt A lot of resilience, increased friction, so that the bolt is not easy to loose.

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut with a nylon collar that increases friction on the screw thread.
The nylon collar insert is placed at the end of the nut, with an inner diameter (ID) slightly smaller than the major diameter of the screw. The screw thread does not cut into the nylon insert, however, the insert deforms elastically over the threads. The insert locks the nut against the screw as a result of friction, caused by the radial compressive force resulting from the deformation of the nylon. Nyloc nuts retain their locking ability up to 250 °F (121 °C).

Product name	Nylon lock nut
Place of origin	China(Mainland)
Brand Name	NEWSTARWDH
Delivery time	Normally in 7-35 days, according to quantity
MOQ	500kgs for each specification
Mark	According to customer’s requirement
OEM	Available