11/08/2020
In the machinery manufacturing industry, a large number of bolt parts need to be applied. Bolt parts are divided into corresponding 10 grades according to their basic properties and performance.
Among them, bolt parts with a performance level greater than 8.8 are called high. Strength bolts.
Among them, bolt parts with a performance level greater than 8.8 are called high. Strength bolts.
07/08/2020
Add lubricating oil to the tap rupture, use a sharp tassel or cut something that can bear the force, and gradually knock it out on the reverse side of the break.
Don't forget to pour the iron from time to time (this method is commonly used in the workshop, but if the hole diameter is too large) Small threaded holes or broken taps are too long to fit, but can be tested).
Don't forget to pour the iron from time to time (this method is commonly used in the workshop, but if the hole diameter is too large) Small threaded holes or broken taps are too long to fit, but can be tested).
06/08/2020
Hastelloy C-276 alloy is a tungsten-containing nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be a universal corrosion-resistant alloy.
Hastelloy materials are mainly resistant to wet chlorine, various oxidizing chlorides, chloride salt solutions
Hastelloy materials are mainly resistant to wet chlorine, various oxidizing chlorides, chloride salt solutions
05/08/2020
Stainless steel standard parts have their own requirements for production raw materials.
Most stainless steel materials can be made into steel wires or bars for fastener production, including austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, and precipitation hardening stainless steel.
Most stainless steel materials can be made into steel wires or bars for fastener production, including austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, and precipitation hardening stainless steel.